Cable Connectors
MC Cable Connector
Part number: MC4
Cable Connectors
MC Cable Connector
- Part number
- MC4
- Manufacturer
- Killark / Hubbell
- Category
- Cable Connectors
- Series
- MC
- Hazardous class
- Class II, Div. 1 & 2, Groups E, F, G; Class III; Class I, Zone 2, Group IIC, Zone 20. Suitable for wet locations. Types 3, 4X, IP66, IPX8 6ft/1hr. Suitable for use in Class I, Div. 2 locations per NEC 501.10. Ta -50C to 60C. Note: where explosion proof/flameproof enclosures are used the MC must be installed with an approved sealing fitting; in Div.2 areas MC can fit directly to an enclosure with no ignition source.
Specifications
- Entry Thread Npt
- 1 1/4"
- Max Number Of Cores
- 73
- Suitable Cable Types
- AC90/ACWU90/AC90-HL/ACWU90-HL/ACG90/ACGWU90; MCC/MCI/MCI-A/MC-HL; RA90/RA90-HL; TECK90/TECK90-HL; TC/TC-ER/TC-ER-HL/PLTC-ER/ITC/ITC-ER/MV/Type P
- Through Diameter A
- 1.28" (32.5)
- Armor Diameter B Min
- 1.15" (29.2)
- Armor Diameter B Max
- 1.48" (37.6)
- Diameter C Min
- 1.23" (31.2)
- Diameter C Max
- 1.56" (39.6)
- Max Length D
- 3.1" (79)
- Npt Length E
- 1.05" (26.7)
- Hex Across Flats
- 2.36" (60)
- Hex Across Corners
- 2.50" (63.5)
Full dimensions and datasheets are available on request — we'll send them with your quote.
Back to Cable ConnectorsMore MC parts